Before installation, ensure you have:

• A 2.4GHz Wi-Fi network (5GHz networks are not supported).
• A mobile device with the InvisHome app installed (available for iOS and Android).
• Access to your home’s circuit breaker to safely install the device.

The package contains:

• 1x InvisOutlet
• 1x InvisDeco Pro
• 1x Installation Guide

The InvisOutlet Pro allows for the independent control of two outlets. Each outlet supports up to 15A of power, ideal for controlling various home devices such as lamps, fans, and appliances.

This smart outlet features multiple sensors:

• Temperature sensor: Monitors room temperature.
• Humidity sensor: Tracks relative humidity levels.
• Air quality sensor: Measures air quality, with color-coded indicators.
• Motion sensor: Detects movement for occupancy-based automation.
• Occupancy sensor: Detects presence and absence to optimize energy usage.
• Ambient light sensor: Adjusts the outlet behavior based on light levels in the room.

Each outlet has an LED indicator: Top outlet is the left-hand LED, bottom outlet is right-hand LED.

The nightlight can be controlled via the InvisHome app or integrated systems, providing soft illumination for safe nighttime navigation.

You can manually control both outlets by tapping the respective touch-sensitive area towards the left side of the InvisDeco cover plate.
This feature is set as disabled by default, to avoid pets touching the cover plate and accidentally turned on or off the outlets.

• Pulse: Pairing mode active.
• Blink: Pairing in progress.
• Slow Blink: Device is connecting to Wi-Fi.
• Solid LED: Pairing complete, outlet is powered.
• Single Click: Toggle both outlets on/off.
• Double Click: Restart the device.
• Long Press (5 seconds): Reset network settings (without erasing device settings).
• Long Press (10 seconds): Full factory reset (erases all settings).

• White: Calibrating.
• Blue: Excellent.
• Green: Good.
• Yellow: Fair.
• Orange: Poor.
• Red: Dangerous.
• Purple: Hazardous.

Before starting installation:

• Turn off the power at the circuit breaker.
• Ensure your wiring configuration supports Line (Hot), Neutral, and Ground connections; ground is not required.

Before starting installation:

1. Remove existing outlet: Unscrew the current outlet and disconnect the wires.
2. Remove InvisDeco Cover-Plate: Carefully unsnap the cover plate by pressing on the middle InvisOutlet while pulling firmly on the indented outer corners.
3. Wire the InvisOutlet:
   Line (Hot) wire to the line terminal.
   Neutral wire to the neutral terminal.
   Ground wire to the ground terminal.
4. Secure the outlet: Screw the InvisOutlet into the electrical box.
5. Install the InvisDeco: Snap on the InvisDeco cover plate and restore power at the circuit breaker.

The first step in setting up your InvisOutlet is to download the InvisHome app. This app is available for both iOS and Android devices.

• For iOS and iPadOS (Apple devices): Go to the App Store and search for InvisHome. Click Download to install the app on your iPhone or iPad.
• For Android devices: Open the Google Play Store, search for InvisHome, and tap Install to download the app.

1. Open the InvisHome app on your device after installation.
2. If you’re a new user, sign up by entering your email and creating a password.
3. If you already have an account, simply log in using your existing credentials.

1. Once logged in, ensure your InvisOutlet is powered on and in pairing mode (the LED indicator should be blinking).
2. Tap the "+" icon in the app to start the device setup. Select the option to “Add Device”
3. You will be prompted to scan a QR code, which can be found on the InvisOutlet metal plate, as well as the Installation Guide.
4. Follow the on-screen prompts to complete the setup process by assigning a room to the device.

To integrate with Apple Home for voice control via Siri:

1. Ensure your InvisOutlet is in pairing mode (LED blinking).
2. Open the Apple Home app on your iOS device.
3. Select "Add Accessory" and scan the HomeKit setup code located on the device or in the setup guide.
4. Follow the on-screen instructions to add the InvisOutlet to your HomeKit.
5. Once connected, you can use Siri to control the outlets.
   Simply say commands like: "Hey Siri, turn off the InvisOutlet."

To integrate with Amazon Alexa:

1. Make sure Amazon Alexa app is installed on your phone.
2. Open the InvisHome app and go to the Settings page.
3. Select Assistant Linking and click Link with Alexa, it will automatically redirect to the Amazon Alexa for account linking.
4. Follow the on-screen instructions to add all the devices under your InvisHome account to your Amazon Alexa account.
5. Once set up, use Alexa commands such as:
   "Alexa, turn on the InvisOutlet."
   "Alexa, set the bottom outlet to off."

To integrate with Google Home:

1. Open the Google Home app.
2. Navigate to Devices and select “Add”.
3. Select “Matter-enabled device” and scan QR code.
4. Follow prompts to connect to your Google Home account.
5. Once set up, you can control the outlet via Google Assistant commands:
   "Hey Google, turn on the top outlet."
   "Hey Google, set the bottom outlet off."

To integrate with Samsung SmartThings:

1. Before you get started, make sure you have a Samsung hub that supports Matter, such as the Samsung SmartThings Station.
2. Use the Samsung SmartThings app to add a Matter device.

• Check Power: Ensure the circuit breaker is on and the device is connected.
• Wi-Fi Issues: Confirm the device is within range of your Wi-Fi and the signal strength is adequate.
• Factory Reset: If problems persist, hold the reset button for 10+ seconds to reset the device to factory settings.

• Check Network: Ensure you're connected to the 2.4GHz network and retry.

• CAUTION - Risk of Electric Shock - Ensure power is off at the circuit breaker before removing or installing any outlet. Use a non-contact voltage tester to ensure the power is off.
• InvisOutlet must be installed and used in accordance with the National Electric Code (NEC) or your local electrical code. Consult a qualified electrician if you are unfamiliar with these codes and/or uncomfortable performing the installation.
• Do not install InvisOutlet with wet hands or when contacting wet or damp surfaces.
• Install only in a suitable outlet box with dimensions: H>2.95 in./75mm, W>1.81 in./46mm, D> 3.15 in./80mm.

Need help? Don’t hesitate to reach out.

• Email: support@intecular.com
• Website: support.intecular.com