InvisOutlet and InvisDeco Firmware Changelogs

This post will be used to show each firmware update’s changelog for both InvisOutlet and InvisDeco.

InvisOutlet (IVO1 revA)

0.9.20

WARNING: This update will change MQTT topics, if you are using MQTT with other services, please update with associated topics.

This does not affect Home Assistant integration provided by the device itself, as the discovery payload will handle this automatically.

1. Improved software update flow for faster and more reliable updates.
2. Updated MQTT topics with “intecular” in front of all original topics. For example: intecular/IVO1_XXXX instead of /IVO1_XXXX.

0.9.10

1. Minor bugs fixed.

0.9.00

1. Retain previous color for InvisDeco Aura after power loss or system restart. (Requires Matter network reset.)
2. Adding new InvisDeco Aura color effects! Including color palette, temperature, breathing, strobing, color cycle, rainbow, and starry night. All available with speed and random/rainbow adjustments!
3. Improved adaptive nightlight for InvisDeco Aura to retain previously selected color.

0.8.00

NOTE: Please update InvisDeco to the latest firmware to avoid irregular behaviors!
This firmware requires InvisDeco Pro 1.0.1 and InvisDeco Aura 0.1.1 or higher firmware version.

1. Added Magic Touch and Home Away support.
2. Set retain to true for outlet and nightlight status for MQTT.

0.7.50

1. Fixed the bug where if the InvisDeco update failed, then InvisOutlet would not be able to communicate with the InvisDeco.
2. Minor bug fixed.

0.7.30

1. Fixed the bug where the device won’t be connected after updating the firmware or restarting.
2. Added the ability to decide whether to override adaptive nightlight/occupancy nightlight when nightlight is being controlled.
3. Fixed the bug where the accessory names are not being saved.
4. Fixed the bug where the nightlight status is not being restored after a restart.

0.7.20

1. Removed automatically to rediscover entity on Home Assistant.
2. Added independent control of sending/clearing Home Assistant MQTT Discovery Payload.
3. Added the ability to check MQTT connection status.
4. Minor bugs fixed.

0.7.10

1. Fixes the issue where the device may not connect after updating firmware or pairing.
2. Fixed the bug where factory reset isn’t clearing configuration settings.

0.7.00

1. This release requires InvisDeco firmware 0.9.9 or later.
2. Updated Matter to save the last known state of the outlet and nightlight. (Requires Matter network reset.)
3. Optimized OTA update flow.
4. Added the ability to calibrate temperature and humidity.

0.6.72

1. This release requires InvisDeco firmware 0.9.7 or later.
2. Added the ability to turn on the nightlight based on occupancy.
3. Added the ability to perform occupancy sensor calibration.
4. Fixed the bug where reconnecting to the MQTT broker will reset the outlet (and nightlight) states.

0.6.71

1. Fixed Home Assistant MQTT Discovery Payload.
2. Set QoS to 1 and retain flag to true for Home Assistant MQTT Discovery Payload.

InvisOutlet (IVO1 revB)

0.3.10

1. Fixed a bug where devices may disconnect from the internet when IPv6 is enabled on the Wi-Fi network.
2. Optimized cloud connectivity for improved stability.
3. Improved InvisDeco update speed and reliability when updating via InvisOutlet.
4. Minor bug fixes.

0.3.00

WARNING: This update will change MQTT topics, if you are using MQTT with other services, please update with associated topics.

This does not affect Home Assistant integration provided by the device itself, as the discovery payload will handle this automatically.

1. Improved software update flow for faster and more reliable updates.
2. Updated MQTT topics with “intecular” in front of all original topics. For example: intecular/IVO1_XXXX instead of /IVO1_XXXX.
3. Minor bugs fixed.

0.2.10

1. Minor bugs fixed.

0.2.01

1. Minor bugs fixed.

0.2.00

1. Retain previous color for InvisDeco Aura after power loss or system restart. (Requires Matter network reset.)
2. Adding new InvisDeco Aura color effects! Including color palette, temperature, breathing, strobing, color cycle, rainbow, and starry night. All available with speed and random/rainbow adjustments!
3. Improved adaptive nightlight for InvisDeco Aura to retain previously selected color.

0.1.11

1. Added Magic Touch and Home Away support.
2. Fixed an issue where InvisDeco Pro's occupancy sensor cannot be configured in the InvisHome app.
3. Minor bugs fixed.

0.1.10

NOTE: Please update InvisDeco to the latest firmware to avoid irregular behaviors!
This firmware requires InvisDeco Pro 1.0.1 and InvisDeco Aura 0.1.1 or higher firmware version.

1. Fixed a bug where indicator will not slow blink when Wi-Fi is connecting.
2. Set retain to true for outlet and nightlight status for MQTT.
3. Supported Magic Touch for InvisDeco Pro.
4. Minor bugs fixed.

InvisDeco Pro (PRP1)

1.0.2

1. Fixed a bug where occupancy sensor cannot be detected.

1.0.1

NOTE: Please update InvisOutlet to the latest firmware to avoid irregular behaviors!
This firmware requires InvisOutlet (revA) 0.8.00 or InvisOutlet (revB) 0.1.10 or higher firmware version.

1. Added Magic Touch support.
2. Minor bug fixed.

1.0.0

1. Fixed the issue InvisDeco can’t update via InvisOutlet.
2. Fixed a bug where the light sensor isn’t updating.

0.9.9

1. This release requires InvisOutlet firmware 0.7.00 or later.
2. Added the ability to calibrate temperature and humidity.
3. Optimized OTA update flow.

0.9.8

1. This release requires InvisOutlet firmware 0.6.72 or later.
2. Fixed a bug when adaptive nightlight and occupancy nightlight are both enabled.

0.9.7

1. This release requires InvisOutlet firmware 0.6.72 or later.
2. Added occupancy nightlight feature.\nAdded occupancy sensor calibration.
3. Minor bug fixes.

InvisDeco Aura (LIP1)

0.3.00

1. Improved software update flow for faster and more reliable updates.

0.2.00

NOTE: Please update InvisOutlet to the latest firmware to avoid irregular behaviors!
This firmware requires InvisOutlet (revA) 0.9.10 or InvisOutlet (revB) 0.2.10 or higher firmware version.

1. Adding new InvisDeco Aura color effects! Including color palette, temperature, breathing, strobing, color cycle, rainbow, and starry night. All available with speed and random/rainbow adjustments!
2. Improved adaptive nightlight for InvisDeco Aura to retain previously selected color.

0.1.1

NOTE: Please update InvisOutlet to the latest firmware to avoid irregular behaviors!
This firmware requires InvisOutlet (revA) 0.8.00 or InvisOutlet (revB) 0.1.10 or higher firmware version.

1. Fixed a bug where the outlet indicator will be turned on even if the preference is set to off.
2. Reduced outlet indicator brightness.
3. Fixed a bug where the color light will change to white when adaptive nightlight feature is on.