Air Quality Sensor Stuck in Calibration

InvisOutlet Pro's air quality sensor measures AQI (Air Quality Index) through a calibration period. The average calibration time is around 7 days; however, it can be longer depending on the installed location.

Below are the best practices that will speed up the calibration phase:

• Make sure there are dynamic air changes during the calibration period. For example, cooking, opening/closing a window, etc.
• Do not blow air directly into the InvisOutlet Pro's vents.
• Do not plug in heat-generating power adapters into the InvisOutlet Pro's receptacle.

If your device is unable to pass the calibration phase within 7 days, this means there isn't enough air change. Please try:

1. Using isopropyl alcohol to dampen a cloth.
2. Put the cloth close to the InvisDeco Pro's vent holes on the top left for 30 minutes.
3. Remove the cloth after 30 minutes.
4. The air quality sensor will pass the calibration phase after a day or two.

Note: You will see dramatic AQI reading changes during this period; this is normal as it is performing its calibration.