1. Turn off the power: Ensure the power is off at the circuit breaker before removing or installing any outlet. Use a non-contact voltage tester to confirm the power is off.
2. Follow electrical codes: InvisOutlet must be installed and used in accordance with the National Electric Code (NEC) or your local electrical code. Consult a qualified electrician if you are unfamiliar with these codes or uncomfortable performing the installation.
3. Avoid wet conditions: Do not install InvisOutlet with wet hands or when contacting wet or damp surfaces.

1. Remove the Old Outlet: Turn off the circuit breaker for the outlet you are replacing. Remove the outlet by unscrewing the cover plate and disconnecting the wires.
2. Detach the InvisDeco: Press the inside of the InvisOutlet while pulling on the right-side corners of the InvisDeco cover plate. Note: Removing the cover plate requires a firm grip.
3. Connect the Wires: Position the InvisOutlet with the 5-pin connector on the right. Insert the white neutral wire and black line wire from the wall into the corresponding WAGO connectors, and secure the green ground wire to the bottom ground screw.
4. Secure the InvisOutlet: Screw the InvisOutlet in place, then snap the InvisDeco cover plate on by applying pressure from right to left until all corners are snapped and flush with the InvisOutlet. The vents should be at the top.
5. Add Your Device: Open the InvisHome app, tap the “+” button, select “Add Device,” and follow the instructions within the app to connect your device.

To download the app: Visit the App Store (for iOS) or Google Play (for Android).
‍The InvisHome app allows you to manage InvisOutlet’s features and settings.
Control your InvisOutlet’s outlet power, nightlight brightness, and other customizations.
Organize your InvisOutlets by home and room to get a personalized snapshot of measurements including air quality, occupancy, temperature, humidity, and more.

1. Search for InvisHome and download the app.
2. Open the app and follow the on-screen instructions to create your account and register your InvisOutlet.
3. Enable Bluetooth or Wi-Fi, and let the app guide you through the pairing process.

For any troubleshooting or additional support, contact our customer service team using the bottom right customer support chat bubble to reach us. Or simply send us an email at support@intecular.com.